Making a new cable harness for a 2 meter duplexer

Published: 2/22/2024

After cleaning this duplexer up and making a new cable harness for it, I wanted to tune it for repeater use on the 2 meter band. Since I had taken apart and re-assembled the duplexer, I started with a rough tuning of each cavity individually, then proceeded to a fine tuning and alignment with the cavities connected together with the new cable harness.

Tagged: Amateur Radio and Electronics

Previous in Amateur Radio and Electronics: Cleaning up a 2 meter duplexer
Next in Amateur Radio and Electronics: Tuning a 2 meter duplexer

If this is the kind of thing you're into, you might enjoy my other videos. If you have any questions or comments, please drop me a line.

Aaron D. Parks
aparks@aftermath.net